A600 GNSS Auto-Steering System
Solution for precision agriculture
The Meridian A600 Auto-Steering System is
an automatic steering system which uses high-torque motor control steering
wheel. It integrates the advantages of fast and easy installation, large
torque, high precision, low noise, low heat and quick debugging. It is suitable
for various applications of tractors, harvesting machines, plant protection
machinery, rice trans-planters and other agricultural machinery.
The system includes a control tablet
integrated with a 4G modem, a steering wheel motor with a built-in controller,
and an angle sensor. It can be widely used for sowing, cultivating, trenching,
ridging, spraying pesticide, transplanting, land consolidation, harvesting and
other work scenarios.
Key Features
★ Supports multiple constellations &
frequencies:
- GPS
L1, L2
- GLONASS
L1, L2
- BeiDou
B1, B2
- GALILEO
E1, E5b
- QZSS
L1, L2
- SBAS
L1
★ Small high-torque motor
★ Highly integrated
system
★ 10.1’’ touch screen control tablet
★ High accuracy to ±2.5cm
★ Without modification of the hydraulic
system Fast installation in 30 minutes
★ Calibration in 15 minutes
System
|
|
|
Operating System: |
Android 6.0 |
|
CPU: |
Quad-Core1.5GHz |
|
Memory: |
2GB RAM + 16GB ROM |
|
External Flash: |
T-Flash, up to 64GB |
|
LCD: |
10.1’’ Capacitive Touch
Screen |
|
Resolution: |
1024x600 pixel |
|
Communication |
|
|
Wi-Fi: |
2.4GHz IEEE 802.11
b/g/n |
|
Cellular: |
FDD-LTE 800 / 1800 /
2100 / 2600MHz TD-LTE 1900 / 2300 /
2500 / 2600MHz WCDMA 850 / 900 / 1900
/ 2100MHz GSM 850 / 900 / 1800 /
1900MHz |
|
Bluetooth: |
V4.0 |
|
USB: |
USB 2.0 (host &
debug) x1 |
|
Audio: |
3.5mm Audio Jack for
Audio Serial |
|
Port: |
RS232 x2, RS485 x1 |
|
CAN Port: |
CAN x2 (J1939, CANOpen,
ISO15765) |
|
Ethernet: |
RJ45 (100M Ethernet) x1 |
|
|
|
|
|
|
|
Electrical |
|
Power Input: | 9V~36V DC |
Power failure detection: | supported |
Power output: | 12V DC x2 |
Physical | |
Dustproof&Waterproof: | IP-65 |
Dimension: | 281mmx181mmx42mm |
Weight: | 1.5kg |
Operating Temperature: | -20 ℃ ~ +70 ℃ |
Storage Temperature: | -40 ℃ ~ +85 ℃ |
Technical Specifications
- T100 Control Tablet
Technical Specifications
- EMS2 Motor Wheel
Motor Performance
| Rated speed: | 100 rpm |
| Rated torque: | 10 N·m |
| Guaranteed continuous operation speed: | 100 rpm |
| Maximum freewheel error: | 0 (without reducer) |
| Supply voltage: | 8V~16V DC |
| Rated current: | 10A |
| Stall current: | 25A |
| Rated voltage: | 12V |
Communication
| Communication protocol: | ModBUS |
| Encoder resolution: | 1000 lines 4000 pulses / circle |
| Encoder interface (protocol): | parallel, no protocol |
| Encoder maximum output rate: | 200KHz |
| Communication interface: | RS232 |
Physical
| Dimension: | φ 187x100.2mm (motor) |
| φ 410x32mm (steering wheel) | |
| Weight: | 6.35kg (motor only) |
| Material: | Aluminum alloy |
| Operating Temperature: | -40°C 〜+105°C (motor) |
| Storage Temperature: | -45°C 〜+150°C (motor) |
Technical Specifications
- R1 Smart Antenna
| Operating Temperature | -30°C 〜+70°C | |
| Storage Temperature | -40°C 〜+85°C | |
| Physical Dimension | 179x179x69mm | |
| Weight | 1-1 Kg | |
| Protection Level | IP67 | |
| Power Consumption | <6.0W | |
| Supply Voltage | DC 9 〜36V | |
| Signal | GPSL1/L2 BDS B1/B2, GLONASS L1/L2, Galileo E1/E5a/E5b, QZSS L1/L2/L5 | |
| Hot Start | <10S | |
| Cold Start Time | <25s | |
| Recapture | <1S | |
| Initialization Time | <5S(Typical Value) | |
| Initialization Reliability | Single point positioning | |
| Differential Data | RTCM V3.0/3.2 | |
| Data Format | NEMA0183, Unicore | |
| Channel | 432 Channel. Based on Nebulasll chip | |
| Single Point Positioning(RMS) | Vertical | 1.5m |
| Elevation | 2.5m | |
| DGPS(RMS) | Vertical | 0.4m |
| Elevation | 0.8m | |
| Orientation Accuracy | 0.2degree/1m | |
| RTK(RMS) | Vertical | 1cm+1ppm |
| Elevation | 1.5cm+1ppm | |
| Time Accuracy | 20ns | |
| Speed Accuracy | 0.03m/s | |
Contact Us
Guangzhou Meridian GNSS Co., Ltd.
Building 4, No. 33, Bangjiang East, Shilian Road, Dalong Street, Panyu District, Guangzhou, China.
